US Lock Supply Stocks The Full Detex Line. The ECL-230X-TDB is a code compliant, battery alarmed, rugged 3-point dead bolt, panic device with photo-luminescent sign providing maximum security and a 100 decibel alarm for secondary exits. Independent laboratory testing shows that the ECL- 230X-TDB can withstand up to 16,000 pounds of pull force.

Detex ECL-230X-TDB Intructions Video

• Reduces employee and customer theft

• Attack resistant design for maximum holding force

• Proven durability and reliability at a reasonable price

• Easy to install

• 3-point, 1" throw dead bolt lock with just over 3/4” engagement with the frame, and 3/4” throw top and bottom locks with 5/8” engagement with the strike

• Saw resistant dead bolts

• Corrosion resistant alloy lock body

• 100 decibel alarm, powered by 9-volt battery (included)

• Time tested construction resists attack from the inside

• One size fits 36”-48” doors for code compliant acceptance

• For maximum security with 6 locking points, specify ECL-230X-TDB-DX3

• Easy to see if the lights go out

• Straightforward operation that everyone understands

• Surface/flush reversible strike

• Accepts 5-pin through 7-pin standard and interchangeable core rim cylinders without using cylinder collar

• Durable photo-luminescent sign absorbs light to then "glow in the dark" when lights are dimmed

• Locking and unlocking the dead bolt always arms and disarms the alarm

• Non-handed

• Low profile meets International Building Code requirement allowing for 4” maximum projection off face of door

• Resetting the alarm can only be accomplished with a control key

• For 9VDC hardwiring add BE-961-1 or BE-961-2

Fire-Rated Exit Control Hardware Features Benefits The ECL-600 is a fire rated, code-compliant, rugged, dependable relatching exit device with a steel plate and photo-luminescent sign providing managed security and a 100 decibel alarm for secondary fire exits.

Instructions For Detex ECL-600

• Gray Finish (Std.)

• Black Finish (BK) Mechanical Options

• English Push Plate Sign (Std.)

• Other Languages available (call factory for details)

• For Panic Hardware see ECL-230D or ECL-230D-PH ECL-620 ECL-600 Also available in Black (Cylinders and bar guard sold separately)

• Attack resistant design withstands over 2200 lbs. of outside pull force

• Proven durability, reliability and long service life at a reasonable price

• Reduces employee and customer theft

• Easy to Install

• Time tested construction resists attack from the inside

• Easy to see if the lights go out

• Straightforward operation that everyone understands

• 1" throw dead bolt and 3/4" dead locking latch bolt

• Relatching for additional security

• Saw resistant dead bolt

• Corrosion resistant alloy lock- body

• 100 decibel alarm, powered by 9-volt battery (included)

• Accepts 5-pin through 7-pin standard and interchangeable core rim cylinders

• Durable steel plate with photo luminescent sign

• Non-handed

• Locking and unlocking the dead bolt always arms and disarms the alarm

• Resetting the alarm can only be accomplished with a control key

Detex V40 Hex Dogging & V40 HD W Rim Panic Exit Device. The V40 Series rim exit device is secure and durable panic and fire exit hardware at an economical price. It is designed for use on all types of single and double doors with mullions. The patented mounting plate and strike locator system ensures the easiest and most accurate installation of panic hardware available. US Lock Supply Stocks The V40 In All Options.

Installation Video 

Benefits:

• Priced to be the best value for durable and attractive loss prevention panic hardware

• Fast and easy installation

• Minimal door prep saves time and money

• Fits almost any door in any décor

• Outside trims are easily changed or rekeyed without removing device from door

Features:

• Patented mounting plate and strike locator

• Covers a 161 door prep

• Stainless steel, 3/4" deadlocking Pullman-type latch bolt

• Non-handed

• Field sizeable

• 1/8 turn hex key dogging

• Heavy-duty angled end cap

• Heavy-duty ribbed aluminum rail extrusion

• High impact ABS and anodized surfaces

• Withstands over 1400 pounds of static pull force for greater security

• Modular design accepts a variety of outside trims and functions

• Standard and narrow stile pull trims available

Mechanical Options:

• HD - Hex Dogging (Std.)

• 36 - Fits 36" Door Width (Std.)

• 48 - Fits 48" Door Width

• 99 - Surface Strike (Std.)

• 98 - Semi Mortise Strike

Instructions Catalog

The V40xEBxW device option is designed for doors and gates requiring a stand alone, battery powered, alarmed, weatherized panic device. The alarm, with approximately 100dB, will sound when someone attempts to exit, alerting management that an unauthorized exit has occurred. The internal alarm with both remote bypass and remote signaling capabilities is ideal for applications where both security and life safety are a concern. In addition to listing as UL panic and fire exit hardware device, this device conforms to MIL-STD 810F Method 506.4 (driving rain test), MIL-STD 810F, Method 509.4 (salt fog test) and UBC standard 7-2 (positive pressure).

US Lock Supply Stocks The Detex V40 EB W CD In All Options

Video Instructions For Detex V40 EB W CD

Benefits:

• Weather resistant loss prevention hardware designed for use in outdoor or wet environments

• Patented back plate and plastic strike locator designed for perfect alignment with door and frame without paper template 

• Fast, easy, trouble-free installation prevents costly mistakes and enhances security

• Provides reliable loss prevention protection 24 hours a day

• Controls foot traffic to deter unauthorized exits and reduces employee and customer theft • Rugged, durable, corrosionresistant design reduces maintenance

• Aesthetically pleasing design for almost any door or gate in any décor

Features:

• Powered by standard 9-volt battery

• Stainless steel, self-latching bolt

• Angled end cap deflects damage

• Tamper-resistant, immersion- proof security switches

• Covers a 161 door prep

• Plated steel, anodized aluminum and ABS components endure heavy use and exposure to the elements

 • Built-in inhibitors prevent ABS fading and weakening, typically caused by exposure to extreme temperatures and UV rays

• 100dB alarm

• Indefinite alarm requiring manual rearm or variable 2 min. alarm duration with auto re-arm

• Cylinder dogging standard (can also be ordered less dogging)

 • Visual and audible arming indicators

• Tamper-resistant housing protects electronics, battery and internal hardware, preventing manipulation

• Tapered design sheds rainwater

• Visual and audible low battery alert

• Armed and disarmed field selectable status indicator

Mechanical Options:

• CD - Cylinder Dogging (Std.)

• 36 - Fits 36" Door Width (Std.)

• 48 - Fits 48" Door Width  

• 99 - Surface Strike (Std.)

• 98 - Semi Mortise Strike 

Detex Catalog 

Specifications

• Hand: Non handed, “push" labels for each hand supplied standard
• Functions: See trim selection chart on the Options tab
• Finishes: US28, DC13.
• Strikes: TD35 strike supplied standard.
• Latchbolt: 1 1/4" high x 3/4" projection, hardened steel.
• Dogging Feature: Quarter turn hex key dogging
• Cylinder: Key entry (NL) or hold back (HB) feature available, simplified cartridge mounting for most standard rim cylinders, furnished in DC35 if not specified Please Call For Cylinder Options.
• Sizes: 36", Please Call For Size Options 42", 48"
• Doors: 1 3/4" thick metal or wood, specify if other than 1 3/4"
• Projections: 2 3/4" maximum, 2" when dogged. Pushbar height is 3"
• Stile: 2" minimum
• Electric Functions: EL - electric latch retraction, include "S". Requires PS873-2 minimum power supply. S - latch bolt monitor switch (SPDT). Conversion kits available. Devices are handed.
• Fasteners: All mounting screws are concealed
• End Caps: Durable zinc die cast, powder coated
• ANSI: Certified ANSI A156.3-2001 Grade 1 standards
• Shim Kits: 1/2" riser is available
• Retractors: Used for cylinder assembly, special retractors available for use with mullions
• Mullions: Removable mullions are available for pairs of doors

• Hand: Field reversible, non-handed
• Finishes: US28, DC13.
• Strikes: PB48 top
• Latches: Hex bottom latch (standard), RL - rod bottom latch, PL - Pullman bottom latch, ES - electric strike top latch (optional). Device needs to be less bottom rod (LBR).
• Dogging Feature: Hex key dogging standard, except EL where must use hold back feature
• Cylinder: Rim, key entry (NL) or hold back (HB) feature available. Field selectable. Please contact us for cylinder options.
• Sizes: 30", 42",
• Doors: 1 3/4" thick metal doors, specify if other
• Projections: 3 3/8" in neutral position, 2 3/8" in dogged position. Pushbar height is 2 1/2.
• Stile: 1 3/4" minimum
• Electric Functions: EL - electric latch retraction, ED - electric dogging (both EL and ED require PS873-2 minimum power supply). RX - request to exit switch, monitors pushpad SPTD switch.
• Fasteners: All machine screw mounting. Device mounting fasteners are concealed, latch fasteners are exposed to egress side.
• End Caps: Black powder-coated metal end caps
• Vertical Rods: 7' standard, extension rods available up to 10'. Rod extension kits available.
• ANSI: Certified ANSI A156.3 Grade 1 standards

• Hand: Non handed
• Finishes: US28, DC13. Centercase and end cap are powder-coated black only.
• Strikes: TD35 strike supplied standard
• Latchbolt: 1" thickness, 3/4" throw
• Dogging Feature: Hex Key Dogging standard, except EL where must use hold back feature
• Cylinder: Rim, key entry (NL) or hold back (HB) available (field selectable)Please Contact Us If You Would Like The Cylinder Option.
• Sizes: 36", 42"
• Doors: 1 3/4" thick metal or wood, specify if wood door
• Projections: 3 3/8" in neutral position, 2 3/8" in dogged position. Pushbar height is 2 1/2".
• Stile: 1 3/4" minimum
• Electric Functions: EL - electric latch retraction, ED - electric dogging (both EL and ED require PS873-2 minimum power supply). RX - request to exit switch, monitors pushpad SPTD switch.
• Fasteners: All machine screw mounting. Device mounting fasteners are concealed, latch fasteners are exposed to egress side.
• End Caps: Black powder-coated metal end caps
• ANSI: Carry UL label and approved for life safety. Certified ANSI A156.3 Grade 1 standards.
• Mullions: Removable mullions are available for pairs of doors

Falcon 1990 EO Concealed Vertical Rod Cross Bar Exit Device.

Specifications

• Hand: Specify RHR or LHR, not reversible
• Finishes: P28, P13. 
• Strikes: SD36 standard
• Latchbolt: 1/2" throw hardened steel
• Dogging Feature: Hex dogging standard
• Cylinder: Rim, key entry (NL) or hold back (HB) available (field selectable) Please Contact Us For More Cylinder Options.
• Sizes: Field adjustable width, 41" crossbar standard, fits 3' 8" door width, extra length crossbars available
• Doors: 1 3/4" thick metal or wood doors, specify if wood door
• Projections: 4 3/8" extended, 2 1/2" depressed
• Stile: 1 3/4" minimum
• Fasteners: All mounting screws are concealed
• ANSI: Certified ANSI A156.3 Grade 1 standards
• Mullions: Removable mullions are available for pairs of doors

Falcon 24-Vertical EO Rod Exit Device. Panic exit hardware High-traffic applications demand the added strength and protection that comes with a vertical rod device. The Falcon 24-V Series delivers with a surface-applied design that includes standard top latch and deadlocking. The narrow stile and sleek touch bar design ensure an attractive installation.

Hand: Field reversible

Finishes: US3 (605); US4 (606); US10 (612); US26 (625); US26D (626); US32 (629); US32D (630); US28 (628), 313AN. Contact Us For Finishes Not In The Finish Options At 212-677-7530.

Strikes: 3788 top strike is surface applied, 2130 bottom strike is mortised into floor.

Angle Bracket: Use 4215 angle bracket in flush transom installations. Allow use of standard 3788 strike.

Latchbolt: Top stainless steel, top latch 3⁄4" throw, bottom bolt 1 ⁄2" throw.

Deadlocking latchbolt: Standard with top latch

Latch retention hold: Standard with top latch. On top latch.

Dogging feature: Half turn hex dogging standard. No threaded parts to wear out.

Doors: 1 3⁄4" thick, wood or metal. Specify thickness if other than 1 3⁄4" thick.

Projections: 2 3⁄4" maximum, 2" dogged.

Stile: 1 3⁄4” minimum when used in pairs.

Fasteners: All mounting screws are concealed, sheet metal screws standard, machine screws available, specify AMS.

Sex bolts: Recommended when device is used with hollow core wood, composite or light gauge hollow metal doors. For EO device, specify 8 - 425 (#10-24) SNB and 2 - 325 (1 ⁄4"-20) SNB. For devices with trim, specify 8 - 425 (#10-24) SNB.

ANSI: Certified ANSI A156.3-2001 grade 1 standards

Vertical rods: Furnished to length based on a 40" horizontal CL from finished floor and a 7'0" door standard. Variations from these standards must be specified when ordering.

Falcon F-24-Vertical EO Rod Exit Device. Panic exit hardware High-traffic applications demand the added strength and protection that comes with a vertical rod device. The Falcon 24-V Series delivers with a surface-applied design that includes standard top latch and deadlocking. The narrow stile and sleek touch bar design ensure an attractive installation.

Hand: Field reversible

Finishes: US3 (605); US4 (606); US10 (612); US26 (625); US26D (626); US32 (629); US32D (630); US28 (628), 313AN. Contact Us For Finishes Not In The Finish Options.

UL: “A” Label (3 hr) - double egress - 8' x 10'; 90 min. same egress - 8' x 10'. Wood door: 20 min. 8' x 10'; 90 min. 8' x 9'. Consult door manufacturer for maximum rating. 

Strikes: 3788 top strike is surface applied, 2130 bottom strike is mortised into floor.

Angle Bracket: Use 4215 angle bracket in flush transom installations. Allow use of standard 3788 strike.

Latchbolt: Top stainless steel, top latch 3⁄4" throw, bottom bolt 1 ⁄2" throw.

Deadlocking latchbolt: Standard with top latch

Latch retention hold: Standard with top latch. On top latch.

Doors: 1 3⁄4" thick, wood or metal. Specify thickness if other than 1 3⁄4" thick.

Projections: 2 3⁄4" maximum, 2" dogged.

Stile: 1 3⁄4” minimum when used in pairs.

Fasteners: All mounting screws are concealed, sheet metal screws standard, machine screws available, specify AMS.

Sex bolts: Recommended when device is used with hollow core wood, composite or light gauge hollow metal doors. For EO device, specify 8 - 425 (#10-24) SNB and 2 - 325 (1 ⁄4"-20) SNB. For devices with trim, specify 8 - 425 (#10-24) SNB.

ANSI: Certified ANSI A156.3-2001 grade 1 standards

Vertical rods: Furnished to length based on a 40" horizontal CL from finished floor and a 7'0" door standard. Variations from these standards must be specified when ordering.

Sargent 2727 Surface Vertical Rod Exit Device With 12-Fire Option

The 2727 series is a rugged exit device with surface vertical rod and rim designs.

US Lock Supply Stocks The 2727 Series Vertical Rod Exit Device

Ideal For:

• Warehouses
• Fire exits from stairwells in office building.

Bar Sizes:

E-32" Bar

Standard F-36" Bar

G-48" Bar

Finishes:

EN-Sprayed Aluminum

EAB-Sprayed Brass(Call For Availability)

ED-Sprayed Black(Call For Availability)

EB-Sprayed Dark Bronze(Call For Availability)

• Available as Fire Exit Hardware (12-)
• Chassis mounted unit construction assures easy installation and maintenance
• Tapered push rail and angled covers
• Steel end caps and covers
• Meet ANSI/BHMA Standard 156.3, Grade 1
• UL Listed
• UL Listed to Canadian safety standards

Sargent 3727 Surface Vertical Rod Exit Device With 12-Fire Option.

The 3727 is a rugged exit device in surface vertical rod and rim designs.

US Lock Supply Stocks The Sargent 3727. 

EN-Sprayed Aluminum

Bar Sizes:

E-32" Bar(Call For Availability)

Standard F-36" Bar

G-48" Bar

Model:

3727 Standard 

12-3727 Fire Rated 

Sargent 8510 Narrow Design Rim Exit Device.

Sargent 8500 Series 

Sargent AD8400 Narrow Stile Concealed Vertical Rod Exit Device For Aluminum Entrances. 

US Lock Supply Stocks Sargent Hardware.